Sony IER-M7 In-ear monitor headphones

In-ear monitor headphones designed for musicians to evolve the expression and emotion of your performance. With 4x Sony's original Balanced Armature Units, high level sound isolation, and stable fit, you can play with accurate tonal balance on stage. The unique T-shaped Balanced Armature delivers more linear motion and clean, faithful high notes.

$799.99

Find a dealer/rep

Actual prices may vary, contact a dealer for current prices.

previous next

4x Balanced Armature (BA) units for faithful monitoring
Evolve your musical expression through accurate and detailed monitoring with the IER-M7 4x Balanced Armature (BA) Driver Units. Every emotion, sound and tone are balanced and authentically reproduced, consistently.
Sony’s original design Balanced Armature (BA) Driver unit
The unique T-shaped Balanced Armature directly drives the diaphragm for a more linear motion and clean, faithful high notes.
Integrated magnesium alloy inner housing
The BA units are held firmly in an integrated, high-rigidity housing. This helps to eliminate vibration and keeps sound clear and clean without losing even a micro nuance of sound.
Audio grade film capacitor for less distortion
Sony’s custom audio grade film capacitor in the cross-over circuit delivers much lower distortion than ceramic capacitors. Suppressing vibration and electric interference, the audio grade capacitor of the IER-M7 In-ear headphones delivers fine, relaxed sound. Plus, audio grade solder also helps minimize any loss in signal path.
Optimized sound path
While standard BA in-ear monitors rely on a long and narrow flexible tube in their sound path, the BA drivers in the IER-M7 In-ear monitors use a wide and short sound path. This reduces frequency peaks and dips, and gives the ideal frequency response to ensure a monitor sound you can rely on for critical listening accuracy.

Footnotes

¹ 4K upscaling requires a 4K projector or 4K TV. ² Requires devices connected to the same wireless home network. ³ Broadband speed of at least 2.5 Mbps recommended (10 Mbps for HD). Content subject to change and may require fees. ⁴ iPod® and iPhone® support is limited to the following players: iPod touch®, iPod classic®, iPod nano® 1st, 2nd & 3rd generation, iPod® 4th & 5th generation & iPod mini and iPhone 3G, 3Gs and 4G models. ⁵ Requires HDMI® cable sold separately. ⁶ Requires HDTV with equivalent display and HDMI® cable sold separately. ⁷ Requires HDMI® cable and LPCM capable receiver. ⁸ Requires HDTV and HDMI® cable sold separately. ⁹ Syncs with BRAVIA® Sync or Theatre Sync™ products. ¹⁰ May require additional accessories. Check with your authorized Control4® dealer for details. ¹¹ Requires capable HDTV / video source and HDMI® cable sold separately. ¹² Requires 3D content, 3D glasses, and HDMI® cable (at least 10.2 Gbps). ¹³ Simulated 3D image will vary based on source content. ¹⁴ Requires an optional license purchase from an authorized Control4® dealer. ¹⁵ Requires home network and one device on network to be set up as a DLNA server. Streaming content, copy-protected content and certain formats are not supported. ¹⁶ Requires active internet connection and devices connected to the same WiFi® network. ¹⁷ Compared to normal viewing. Based on a 55-inch LED TV with Picture Setting Standard. ¹⁸ As of January 1, 2012. ¹⁹ Streaming content, copy-protected content and certain formats are not supported. ²⁰ Largest, highest resolution consumer television, as of August 2012. ²¹ 65 Watts total power (20+20+12.5+12.5). ²² '4K' is a resolution standard commonly used in the digital cinema industry that refers to images with a horizontal resolution of approximately 4,000 pixels. The actual panel resolution of 84" XBR-X900 is 3,840 x 2,160 pixels (in 16:9 aspect ratio). This corresponds to the so‐called "QFHD" (Quad Full High Definition) display standard. In practice, this is equivalent to the widely-accepted definition of "4K" resolution. ²³ 1.5m is recommended viewing distance for 4K (3840 x 2160) content with XBR-84X9000 to enjoy the most immersive experience. ²⁴ Ethernet connection required. Fees may apply for 4K networked video service. ²⁵ PS3 system and SimulView™ glasses sold separately. ²⁶ Actual panel resolution of XBR‐X900A 4K Ultra HD TV is 3,840 x 2,160 pixels (in 16:9 aspect ratio). HDTVs have a panel resolution of 1,920 x 1080 pixels. ²⁷ Simulated 4K image will vary based on source content. ²⁸ Ethernet connection required. Fees may apply for 4K networked video service. ²⁹ Broadband speed of at least 2.5 Mbps recommended (10 Mbps for HD). Content subject to change and may require fees. Wireless connectivity requires 802.11 home network (802.11n recommended). Skype requires CMU-BR100 or CMU-BR200 camera sold sep. Subject to Skype’s terms and conditions. ³⁰ Requires PS3 system, PlayMemories Studio™ software and HDMI® cable (at least 10.2 Gbps) sold separately. ³¹ Requires compatible Near Field Communication (NFC)-enabled Xperia™ smartphone. Certain formats are not supported. The video quality may be degraded due to environmental interference. ³² Requires smartphone with Wi-Fi® certified Miracast™ technology. Certain formats are not supported. The video quality may be degraded due to environmental interference ³³ Actual panel resolution of XBR‐X850A 4K Ultra HD TV is 3,840 x 2,160 pixels (in 16:9 aspect ratio). HDTVs have a panel resolution of 1,920 x 1080 pixels. ³⁴ Requires compatible Near Field Communication (NFC)-enabled Xperia™ smartphone. Certain formats are not supported. The video quality may be degraded due to environmental interference. ³⁵ 40 Watts total power (10+10+10+10)

In-ear monitor headphones designed for musicians to evolve your musical expression.

Sony IER-M7 In-ear monitor headphones

4x Balanced Armature (BA) units for faithful monitoring

Sony’s original design Balanced Armature (BA) Driver unit

Integrated magnesium alloy inner housing

Audio grade film capacitor for less distortion

Optimized sound path